Despatch Product Spotlight: PBC and PNC Burn-In Cabinet Ovens
March 2020, MARIETTA, GA
~
~ Despatch burn-in ovens are engineered specifically for applications such as high dissipation forward bias, high-temperature reverse bias, dynamic and static burn-in of IC, RAM, ROM, microprocessors and other semiconductor devices.
High volume recirculating fans maintain consistent, uniform temperatures required by MIL STD 883D while removing heat generated by the load.
The rear wall is easily disassembled and removed to simplify fixturing of power leads or feed-through boards into oven.
The PBC burn-in oven allows for traditional horizontal loading. Side to side horizontal airflow provides uniform atmosphere flow across horizontally positioned loads.
Over-temperature protection control monitors maximum temperature and shuts off heater if set point is exceeded.
Easy-to-use temperature controller featuring user-friendly arrow buttons for changing setpoints. The controller also contains programmable EZ-Keys enabling simple one-touch operation of repetitive user activities.
Controller communication includes EIA 232/485 Modbus® RTU and supports network connectivity to a PC or PLC.
Power supply cabinet is a standard E.I.A. 19in (48 cm) cabinet and aesthetically matches the oven. 78in (198 cm) usable opening height
Increased dissipation allows increase in live load capacity without risking over temperature
Automatic damper controls amount of incoming fresh air while saving energy
Rapid cool-down provides faster cycle times
Back up/Redundant Hi-Limit to provide temperature protection in the event the primary device fails
Door switch to de-energize the heater and fan when the chamber access door is opened
Access port at rear of oven for test connections
Casters on bottom of unit for mobility
For additional information
or a product recommendation, please contact FLW Southeast
sales@flwse.com
|